Home All Updates (564) Page 1 95
• In general when we develop body design, we do FEA analysis for all sizes as per the Pressure class.
EXTENDED STEM SLEEVED PLUG VALVES We have supplied 8” Sleeved Plug Valve with Stem extension of 2600 MM from centre to height for M/s. SABIC, Saudi Arabia. Extended stem normally applied whenever the valves are somehow not in a close proximity with the Operator location when he's about to operate the valve (i.e. valve located under water / under ground, too hot of pipeline/valve temperature, potential toxic release / considered as confined space, etc.). Its function is to "isolate" the gland from the high or low temperature zone so as to maintain integrity of the stem seal and the operation of the valve. For Business info please contact firstname.lastname@example.org
• PTFE : Reinforced PTFE /PEEK/MoS2/Bronze, Brass, Glass filled PTFE sleeves surrounded and complete inside body and outer plug area 360° and top to bottom, to ensure sealing. • Sleeved plug valves sealing area will 10 to 12 time higher than equal size of ball valves. • In drawing, No: (11)-shows Thrust compressor bolt , Thrust collar-(08), (04& 05)-Diaphragm and Wedge ring thrust given by Thrust collar-(08) to safeguard.(06)- Metal Diaphragm the Thrust collar(08) will give uniform tightness. • Due to Taper (self-sealing) provision the valve plug is easily adjustable. The design permits any body and plug material combination. Example: Body/Plug LCB/ Monel WCB/SS316 CF8M/CF8M Cd4mcu/Cd4mcu CF8M/CF8M
We have been supplying our Sleeved plug valve up to ( 300 mm ) 12’’ Inches DIN PN 25 to ICS Senegal for Phosphoric acid , this body material made out of CD4MCu and CD4McuN by sand castings. Sleeved plug valve - pressure class range 150# 300# - Size (1/2'' to 16'') . For more info visit us at http://rflvalve.com/We-have-been-supplying-our-Sleeved-plug-valve-up-to-300-mm-12-Inches-DIN-PN-25-to-ICS-Senegal-for-Phosphoric-acid-this-b/b717?utm_source=facebookpage
We have been supplying our Sleeved plug valve up to ( 300 mm ) 12’’ Inches DIN PN 25 to ICS Senegal for Phosphoric acid , this body material made out of CD4MCu and CD4McuN by sand castings. Sleeved plug valve - pressure class range 150# 300# - Size (1/2'' to 16'')